xEnergy (EATON)

xEnergy distribution boards up to 5000 А

xEnergy EatonxEnergy system is developed in accordance with the constantly growing requirements to reliability of the electricity generating equipment, providing optimum conditions for energy distribution up to 5000 A. Each functional module of the given distribution system, as well as cross-connect equipment, connecting elements, casing structure and software is well thought-out and prepared. The system meets the requirements of the standards МЭК 60439-1 and МЭК 61439-2.

Operational characteristics:

  • xEnergy system is designed for strengthening requirements in the future. Its modular structure allows implementing intelligent combinations and extensions
  • each functional module of this switching equipment from connecting elements up to software tool covering is well-thought-out and carefully prepared. The system is suitable for implementation of energy distribution solutions with current up to 5000 A.
  • the system meets the standards МЭК 60439-1 and МЭК 61439-2 

Suitability
Company Eaton offers xEnergy distribution system, which provides reliable and uninterruptible performance of equipment. Possibility of selection of structural system (stationary, dismountable and fully draw-out blocks) significantly reduces time and allows selecting solutions optimally suitable for project requirements.

Safety
Safe design of xEnergy system also provides maximum protection for people and equipment. With increasing level of processing complexity of the used solution (stationary, dismountable and fully draw-out type) maintenance and replacement of switching equipment modules becomes more user-friendly, thereby equipment failures and accidents can be minimized.

Technical characteristics

Lead-in XP section 

  • disconnect, outgoing and automatic section switches
  • inner separation up to Form 4
  • cable inlets above and below
  • Power cable connection system without  hole drilling

Stationary XF design 

  • outgoing circuits with automatic switches and fuse-disconnecting switches for current up to 630 A
  • inner separation up to Form 4
  • separate modules for controlling equipment, electric motor starters, weak current couplings etc.

Dismountable XR design 

  • outgoing circuits with automatic switches and fuse-disconnecting switches for current up to 630 A
  • empty modules for customized solutions
  • replaceable modules and linear  fuse-disconnecting switches can be replaced in the operational mode without power dumping.
  • inner separation up to Form 4
  • Easy maintenance and machine downtime reduction

Draw-out XW design 

  • outgoing circuits with automatic switches up to 630 A
  • outlets for electric motor starters up to 250 kW
  • empty draw-out modules for customized solutions
  • easy unified operation for all block types
  • draw-out blocks can be replaced in the operational mode without power dumping.
  • inner separation up to Form 4
  • precise indicator of the draw-out block position - operating, control or open position
  • easy maintenance with no need for special equipment for block replacement
  • minimum machine downtime
  • Standard МЭК/EN 61439

XG section of general purpose 

  • power factor compensators
  • integration of distribution systems for installation of modular units. Distribution system SASY 60i and xStart
  • individual steady-state solutions on the mounting plate.
Закрыть
Ваше имя
Контактный телефон
Удобное время звонка
:
Тема общения
Введите код с картинки